NEW FOR FALL 2026 Drop-In Series for CARBON GRAPHITE - GE Profile Smart Front Load Washer/Dryer Combo with 4.8 cu.ft. Capacity.

GE is no longer manufacturing the original filter housing—and it was the best design for modification. This housing offered superior ease of upgrading and maximum airflow. When modified, it stopped 100% of visible lint from passing through and over the filter.

DO NOT THROW OUT YOUR OLD FILTER! We still offer upgrade kits to bring it back to peak performance. :)

This New Drop-In Series contains everything needed, boasting high-quality products pre-installed.  Literally pull out your Old Filter Assembly and Insert ours, right out of the box! 

The GE Profile Combo Unit is an exceptional appliance with a notable design flaw for which we have developed a perfect solution. Following comprehensive testing of various products, we have designed a fully removable kit that effectively addresses the design problem in the GE Profile Combo. Lint collecting and clogging the Condenser is prevalent in almost all washer/dryer combination units, including those made by LG and Samsung. I am proud to announce that our kit almost completely eliminates the flaw in the GE Profile Combo Unit!  Most of the Service Technicians are not up to speed in servicing these units.  Prevention to Protect your investment!

 EXACT REPLACEMENT UNIT FOR GE COMBO UNIT 4.8 Carbon Graphite.

Fully Assembled OEM modified housing includes:

1. GE New Style Original OEM Entire Filter Assembly. 
2. Matching OEM Handle Included.
3. Factory Rubber Gasket Installed.
4. Rear (Filter Nubs Removed) to allow a flat surface for strong Adhesion for Rear Strip!
5. All Gaps Filled. Epoxy already applied for superior adhesion of rear foam strip!
6. New Enhanced Filter Strip Kit already installed! Upper, Lower.  Over 3/4" widespread after use. Tripple Layer. Brush-cloth-brush for the absolute best seal! 
7. New for 2026, Only Found on this assembly.   Additional ***Sweeper Strip pre-installed.  Pulls out hanging lint as you remove the filter for cleaning!
8. New for Fall 2026!  Premium Blue Merv 8 Custom Secondary Filter   *** With Tackifier Coating Pre-installed.  Tripple Filtration, Superior Air Flow!  
   1. Without our secondary media filter, lint passes through and over the stock mesh screen, eventually collecting on the second mesh screen. This doubles the airflow restriction compared to the original OEM design. With our second media filter, we capture 100% of visible lint, preventing clogs in the secondary mesh screen and keeping airflow at its maximum.  Simple light Vacuum of the filter only once a month is required.
9. New for Fall 2026! Swing-out locking tabs to secure filter since the factory tabs ware out with use.
10. New for Fall 2026!  Dual Density Rear Expanding Foam!   Hybrid Rear Foam Strip    installed for a Superior Fit every Time!  Stops ALL Lint Bypass. 

***Vacuuming and brushing the coil as recommended by GE might damage the coil / Condenser fins!

 Our ready-to-use, pre-tested "One of a Kind" kit, which has already garnered many happy customers, and experience effortless upkeep.

It's unnecessary to clean the filter after each wash and dry cycle.  This is NOT a standard dryer.

For vacuuming, after removing the filter. Vacuum along the bottom rail inside the machine, proceed directly to the back, ascend up & down the rear, and exit along the top rail, 3 seconds you are done!  Then Vacuum the Exterior of the Filter Strips and the exterior White mesh screen. Then reinstall the Filter Assembly. Good to go until the next notification!

The new, improved secondary filter doesn't require disassembly every five cycles; simply open and vacuum the interior secondary filter every 30 to 50 cycles, once a month or when notified by the machine.

Keep the secondary filter in place while gently vacuuming the White Side. You’ll see no lint buildup on the blue side, and the secondary mesh screen will stay clear and unrestricted.

Contrary to popular belief, cleaning the lint filter after every wash isn’t necessary and doesn’t affect drying performance based on our tests. In fact, removing it too often may let more lint slip past the filter. Accumulated lint can also fall off onto the tracks when the filter is taken out.

If you choose not to install a filter kit and forgo vacuuming each time, you are ultimately creating unnecessary work and potentially allowing more lint to work its way to the coil.  The clothes dry by Moisture Condensing on the Coil, the Slower the Air Flow over the coil, the quicker Water will Condense on the coil and ultimately be pumped out the drain.

* * * * * *    RECOMMENDED: One of our FLUSHING MAINTENANCE KITS   * * * * * *

In addition to this Filter Upgrade. We offer Flushing Kits with a detailed procedure for Flushing the Coil and the Entire Filter Housing Box.  With each Flushing kit, we include easy to follow detailed instructions.  The unit can be flushed all without taking the Machine apart, making your machine Like New!    Caked on Lint / Hair etc. will accumulate to the Left of the Filter Housing and all throughout the machine.  The self-Clean Cycle cannot clean these areas and will ultimately lead to inches of buildup of material and potentially causing unwanted smells and Bacteria growth inside the machine and potential pump damage should clumps of materials break off and get into or block the pump causing it to burnout.

We did all the research and work, just follow our recommendations and enjoy the machine and all its benefits!